Press the LEFT or RIGHT button to navigate to the required menu item and press the ENTER
button to select.
Selection
Translation
It shows...
1
Alarms
Alarms
the alarms browser
2
Settings
Settings
the parameters list
3
Counters
Counters
the counters status
4
Service
Service
the service counters status
5
Exit
Exit
Back to the main display
Select item 5 (Exit) to return to the Main screen or wait approximately 30 seconds.
4.4
Alarm screen
When an alarm arises, the display shows the following image:
When one or more alarms are active, the alarm screen overrides the main screen.
In the upper right area, the current alarm number and the total active alarms number are
visualized.
In the lower area, the current alarm description is displayed.
If more than one alarm is active, the fault descriptors are cyclically displayed for about 2 seconds
each.
Pressing the ENTER button acknowledges the currently displayed alarm.
If all the alarms have been cleared, the display returns automatically to the main visualization.
After one minute, if the acknowledged alarm is still active, the alarm display is shown again.
The icon in the upper left area blinks.
Possible alarm causes:
Instruction book
2920 7111 40
17
