Available From MEGA HERTZ (Master Distributor) • 800.883.8839 • http://www.megahz.com
2003 Quintech Inc. All rights reserved. All product designs and specifications are subject to change without notice.
RFS21502BAA000 Rev C
Model — RFS 2150/2
Part No. RFS21502BAA000
L-Band RF Sensing Switch
General Description:
The
RFS21502BAA000
L-Band RF Sensing Switch provides two (2x1) L-Band sensing switches which detects
the presence of RF (primary) and provides the ability to switch to backup (secondary) on loss of primary. Each
of the sensing switches utilizes a DPDT high frequency relay that has the off path terminated into 75
Ω
. The
primary RF input is filtered, amplified, and detected to operate the relay. When the input level is above the
preset threshold, which is adjustable using the front panel up/down pushbuttons, the relay is energized and the
primary signal path is selected. When the signal falls below the preset threshold, the relay is de-energized and
the secondary signal path is selected. A front panel slide switch has been included to allow manual override to
the secondary input. The rear panel has been equipped with relay contact alarm outputs and a remote override
via contact closure.
Specifications:
Frequency:
950-2150
MHz
Impedance:
75
Ω
Level:
-60 dBm to -20 dBm, adjustable
Insertion Loss:
3 dB + 1 dB
Frequency Response:
+1.0 dB
Return Loss:
12
dB
Isolation:
35
dB
Inputs/Outputs:
2
(2x1)
Manual Override:
Front panel mounted slide switch
Threshold Adjust:
Front panel mounted up/down pushbuttons
Power Requirements:
100-240 VAC, 60/50 Hz (-48VDC optional)
RF Connectors:
BNC,
75
Ω
Mechanical:
1 RU (1.75" H x 19" W x 12.5" D)