MedTrack CR60 Rehabilitation Treadmill Service Manual
Troubleshooting 3-1
3
Troubleshooting
Diagnosis
The tables and flow charts in this chapter cover the following potential
problems.
Electrical Problems
•
Power
•
Cable connections
Electronic Problems
•
PCB
•
Test points
•
Signals
Mechanical Problems
•
Noise
•
Vibration
•
Grade
•
Speed
•
Belts
Use the tables and flow charts on the following pages to diagnose
problems. See Chapter 4 for repair and replacement procedures.
Tools
The following tools may be required:
•
Phillips screwdrivers
•
½-inch hex socket wrench
•
Mechanical stethoscope
•
Digital multi-meter
Warning! High voltage is present under the hood when the treadmill
is plugged into a power source; residual high voltage
remains for a few minutes after the power is removed. Turn