CALL MANAGEMENT FEATURES
• Automatic call type detection: Voice/Modem/Fax
• Answer and Disconnect Supervision
• Trunk group support
• Public and private dial plan support
• User programmable dial plan support
• Forced routing
• Pass-through support for calls to Toll Free, local and special
service numbers (emergency services, etc.)
• Automatic appending and stripping of digits to dialed numbers
• Call Detail Records
• Least Cost Routing with external Quintum VoIP Call Routing Server*
• Caller ID Name and Number
TECHNICAL SPECIFICATIONS
Telephony Specifications
• Voice algorithms: G.723.1 and G.729ab, G.711
• Auto codec negotiation
• Fax Support: Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps,
using industry standard T.38; Super G3 compatible up
to 33.6 Kbps
• Modem support with G.711
• Choice of 1 or 2 T1/E1/PRI Spans
• Standard RJ-45 Connectors
• Coding: A-law, µ-law
• Enhanced (Carrier Grade) Echo Cancellation:
ITU Rec. G 168, up to 128 msec tailsize
• PRI Signaling Protocols: National ISDN-2, Euro ISDN
NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100
• T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF)
• E1 CAS (R2 MF)
• DASS2
• Tandem/TDM switching
• Maximum Call Rate: 7,200 calls/hour
• VoIP to circuit, and circuit to circuit (Tandem/TDM) switching
IP Network Specifications
• LAN Interface: Fast Ethernet port (10/100Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10Base-T or
100Base-TX connections
• QoS Support: IP TOS, DiffServ
VoIP Network Specifications
• Support for multiple SIP User Agents (RFC3261 compliant endpoint)
• DTMF Signaling via RFC 2833 or SIP Info
• SIP Supplementary Services
• Message Waiting Indicator
• SIP Refer Method support
• IVR/RADIUS server support for AAA with integrated multi-lingual IVR+
• Adaptive Voice Activity Detection (VAD) with Comfort Noise
Generation (CNG)
• Adaptive Jitter Buffer
• Packet Loss Concealment
• NATAccess™ - NAT/Firewall
• Security: IP Filtering
• Up to 60 simultaneous VoIP calls
• Support for DNS-SRV
Configuration / Management
• Auto-provisioning
• Quintum Tenor Configuration Manager (GUI) for configuration of
remote individual Tenors
• Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring
and CDR monitoring
• Remote access with external Remote Management Session Server
for gateway management
• Intel Remote Management Module 2 for remote server management
• SNMPv2 Agent
• Command Line Interface
* Quintum product purchased separately
+ Original Quintum Tenor Only
Tenor
Hybrid Gateway 60
Rev. 3
71 James Way, Eatontown, New Jersey 07724
1-877-SPEAK-IP . Tel 1-732-460-9000 . Fax 1-732-544-9119
www.Quintum.com
TENOR HYBRID GATEWAY
SR 1500
Dimensions:
Chassis Height: (1U) 1.70” (4.33 cm.)
Chassis Width (19” rack mounting): 16.93” (43 cm.)
Chassis Depth: 33” (83.8 cm.)
• Weight: 31 lbs. (14.1 kg.)
•
Intel family of Xeon processors
•
Raid I mirroring with hot-swappable drives
• Ethernet (IEEE 802.3): 10/1000 Mb Auto-sensing
• LAN connector: 2 x RJ45
• Power Supply: 100 – 240 Vac, 50/60 Hz
• Power Consumption: 600 Watts max
• Operating Temperature: 50º F (10º c.) – 90º F (35º c.)
• Storage Temperature: -40º F (-40º c.) – 158º F (70º c.)
• Non-Operating Humidity: 90% non-condensing @ 82.4º F (28º c.)
• EMC Certification:
FCC Part 15, EN55022 1994, EN55024 1998
• Safety Certification: UL 60950-1, CSA C22.2 NO. 60950-1,
IEC 60950-1, EN6950:99
• System Cooling Requirement: 2901 BTU/Hour
Integrated PCI Express Card
• Telco: FCC Part 68
• EMC: FCC Part 15, EN55022 1994, EN55024 1998
• Safety: UL60950, EN60950
