ITA-200 Technical Reference Manual Rev 1.0
___________________________________________________________________
_____________________________________________________________________________________
Copyright © 2004-2006 Quintum Technologies, Inc. All Rights Reserved
16 of 58
IP Address
Assignment
(PPPoE)
If you are connecting through PPPoE to your ISP, select
PPPoE from the drop-down menu. Complete the Username
and Password fields.
IP Address
Assignment
(Static IP)
If your ISP assigns you a static IP address, select Static IP
from the drop down menu. Complete the IP address, subnet
mask, gateway and DNS fields. You need to enter at least one
DNS address.
Enable Auto Connect
If enable will attempt to connect with to PPPoE, if fails then
tries DHCP. If this fails, unit will try again to connect with
PPPoE. By default this option is enable.
Primary DNS &
Secondary DNS
Domain Name Server is a host on the Internet that translates
Internet names (such as WWW addresses) to numeric IP
addresses. The DNS addresses are normally provided by your
ISP.
Domain Name
The Internet name for a network or computer system that
identifies one or more IP addresses. Domain names are used
in URLs to identify particular Web pages.
LAN INTERFACE CONFIGURATION
Enable Local DHCP
Server
To enable the ITA-200’s DHCP server. IP address will be
assigned dynamically to the PC connected to its LAN port.
Local IP Address
It refers to the ITA-200’s local IP address. The default is
192.168.10.1.
Subnet Mask
The subnet mask is used to determine what subnet an IP
address belongs to. Use the default: 255.255.255.0 unless it
is specified otherwise by your ISP.
Start IP Address
The starting address of the DHCP server’s address pool.
DHCP Address Range
The range of the IP addresses in the DHCP server’s address
pool.
No. Of Address
Number of IP addresses in the DHCP server’s address pool.
Client Lease Time
The amount of time a client can use an IP address assigned
to it by the DHCP server before the IP address expires.
