ITA-200 Technical Reference Manual Rev 1.0
___________________________________________________________________
_____________________________________________________________________________________
Copyright © 2004-2006 Quintum Technologies, Inc. All Rights Reserved
32 of 58
Figure 15. Download firmware
2- Auto Firmware update:
Before proceeding it is required that you have a HTTP/TFTP server running, and must
have the update file. For details on how to create the update file refer to Appendix B.
1
Connect the pc to the Lan port of the ITA200, and login to the unit with
all privilege. To login with full access (Refer to page 15).
2
Select Misc.servers tab.
3
On the Firmware/Config Server: add the IP or domain name of the
HTTP/TFTP server and select the type of server. Note: if the server is
HTTP the ITA200 will try to access the subdirectory you have specified
on the Firmware/Config field to look for the firmware or configuration
file. Example:
www.company.com/config_directory
, (Figure 14)
4
Press UPDATE to save the changes.
5
Select Maintenance tab.
6
Select Allow Auto Firmware Updates (Figure 16)
7
Press Submit Request.
After set up have been done the ITA200 will automatically check on the update file, on
every reboot, if new version of the firmware have been install.
