ITA-200 Technical Reference Manual Rev 1.0
___________________________________________________________________
_____________________________________________________________________________________
Copyright © 2004-2006 Quintum Technologies, Inc. All Rights Reserved
56 of 58
blockAnonymousCall2: 0
/* Block Anonymous calls on line 2. Enable 1,
Disable 0 */
userPrivilege:
1
/* Set Privilege to see the unit’s web pages. */
AllowRemoteAccess:
1
/* Allow remote access. Enable 1, Disable 0 */
adminPwd::
admin
/* Password field for fixed username ‘admin’ */
userName:
interedge
/* Username Can be anything apart from admin */
userPwd:
interedge
/*User Password for username Rafael*/
faxCodec1:
0
/* Fax on line 1. For T.38 set to 1, VBD set to 0 */
faxCodec2:
1
/* Fax on line 2. For T.38 set to 1, VBD set to 0 */
offhookdialdts:
5002
/* Offhook Dialing digits */
enableOffHookDialing:
0
/* Enable Off hook dialing . Enable 1, disable 0 */
/* Unit Services code on line 1 */
phoneUnitServices1:*60,*61,*62,*63,*64,*65,*66,*80,*68,*78,*69,*79,*76,*77,*74,*70,*71,
*72,*73,*87,*99,*67
/* Unit Services code on line 2 */
phoneUnitServices2:*60,*61,*62,*63,*64,*65,*66,*80,*68,*78,*69,*79,*76,*77,*74,*70,*71,
,*72,*73,*87, 99,*67
/* Note: The Unit Services star codes are set in the following order .
enablecallwaiting, disablecallwaiting, enabledonotdisturb, disabledonotdisturb,
enablecallconference, disablecallconference, enablecalltransfer, disablecalltransfer,
enablecallredial, disablecallredial, enablecallreturn, disablecallreturn,
enableblockanonymous, disableblockanonymous, entercallforwardingnumber,
disablecallforwarding, callforwardingAll, callforwardingonbusy,
callforwardingonnoans, lowerhandsetvol, higherhandsetvol, blockcallerid
localAreaCode:
727
/*Prepend Local Area Code to outgoing call*/
enableLocalAreaCode:
0
/* Local Area Code Enable 1 Disable 0*/
/* Administrative Password. By setting this field to “setpassword”, it will make the TA to
accept the mac address combination password. Username should be ‘admin’ */
superUserPwd:
setpassword
enableReversePolarity:
0
/* Reverse Polarity. Enable 1, Disable 0 */
/ Unit mac address. Used for security. TA checks if this filed macthes its mac address. Avoids
illegal copy of other units config file.
macAddress:
000F26001234
preferredDNS:
4.2.2.4
/* Preferred DNS IP for the unit to use */
stunServer2:
/* Secondary Stun Server */
symmetricDetect:
0
/* Symmetrical Nat : Enable – 1 , Disable – 0 */
rtpProxy:
0
/* Do Rtp Proxy Enable – 1 , Disable – 0 */
t38Port1:
15000
/* T38 port for channel 1 */
t38Port2:
15004
/* T38 port for channel 2 */
dtmfPayload:
103
/* DTMF payload for ex: 103 */