P/N 480-0049-00-13
3-9
Chapter 3: Installation
Connect to PC Console
You will need to connect the
Tenor DX
to your workstation’s serial port via RS-232 connection. (This connec-
tion will be used when you assign an IP address to the unit.) For the instructions below, it is assumed you are
connecting to a Windows PC.
Figure 3-7
Connect to PC Com Port
1. Insert the male end of the DB-9 cable into the port labeled
Console
. (See
Chapter 2: Hardware Compo-
nents
for RS-232 connector pinouts.)
2. Insert the female end of the DB-9 cable into your workstation’s serial port (see your PC documentation for
more information about this port).
1
2
3
4
5
6
7
8
R
E
S
E
T
D
I
A
G
CONSOLE
POWER
ALERT
LAN 1 LAN 2
Line/Act
100
Line/Act
100
DB-9
