background image

 

TECHNICAL ADVICE FOR SAFETY 

MACHINE DESIGNED FOR AGRICULTURAL USE 

 

Please read the advice given below before starting to operate.  This machine is designed 
for agricultural use only.  If used in a different capacity we will not be held responsible 
and the user will be responsible for his own actions. 
 
People using the machine must be advised of the dangers.  Comply with accidental 
protection notices, with work medical regulations with the road traffic regulations with the 
European Community regulations "Agricultural Machine Instructions".  Any technical 
modification will be without the agreement of the manufacturer and we will not be held 
liable for the risks. 
 
GENERAL BASIC RULES - SAFETY INSTRUCTIONS - ACCIDENT PROTECTION 
 
Before each working session please ensure that the machine and tractor are in good 
working order. 
 
  1.  Comply with the advice and safety instructions described in the operating book. 
  2.  Read the stickers on the machine as they give important information. 
  3.  Comply with safety instructions and the Road Traffic Regulations at the time of each 

use. 

  4.  Read the operating book carefully before using the machine. 
  5.  Avoid wearing loose clothing near the machine as it could be caught on the PTO 

shaft, rotors etc. 

  6.  To avoid all risks of fire and premature corrosion keep the machine clean. 
  7.  Make sure that no person stands near the machine before driving and working. 
  8.  Never carry people on the machine.  Do not stay on the machine in transport 

position or when in working position. 

  9.  Only use the equipment provided by the manufacturer to couple the machine. 
10.  Couple the machine on the tractor, raise the machine carefully to avoid risks of 

accidents. 

11.  Always take into consideration the weight and width of the machine on the road. 
12.  Always set the lighting system, signal system and transport locks for road 
 transportation. 
13.  Leave the semi-automatic coupling ropes loose so as to avoid the release of the 

locking system during transport. 

14.  Do not leave a moving tractor unattended.  Stop the engine, disengage the PTO 

shaft and put on the handbrake. 

15.  When you steer to couple the machine make sure the braking capacity is sufficient – 

the braking is influenced by the weight of the machine coupled on the tractor. 

16.  In transport pay attention to the weight transfer when turning sharp corners and 

other road obstacles. 

17.  Only use the machine when all the safety and protection requirements have been 

followed. 

18.  Stop the machine immediately when someone arrives on or near the work area. 
19.  Put the machine on the ground, stop the engine, put the handbrake on and take the 

key out of the tractor before leaving it. 

20.  Do not stand between the tractor and the machine if they are not completely 

stabilized. 

21.  Do not use the machine if tired, under the influence of alcohol or on drugs. 
22.  Keep the reflective apparatus clean on the front and rear of machine. 
 

Summary of Contents for SCD














Reviews: