Qvis 72-8P Series User Manual Download

Page: 206 / 233

197

Please refer to the following sheet for detailed information:

Parameter Function

Date format Here you can select date format from the dropdown list.

Time
Format

There are two options: 24-H and 12-H.

Time zone

The time zone of the device.

System
time

This is to set system time. It becomes valid after you set.

Sync PC

You can click this button to save the system time as your PC current
time.

DST

Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week format.

NTP

You can check the box to enable NTP function.

NTP server You can set the time server address.

Port

This is to set the time server port.

Interval

This is to set the sync periods between the device and the time
server.

5.8.5.1.3 Holiday Setup

Holiday setup interface is shown as in Figure 5-81.

Here you can click Add holidays box to add a new holiday and then click Save button to save.

Figure 5-81

Summary of Contents for 72-8P Series










































































































































































































































Search results

Summary of Contents for 72-8P Series

Reviews:

Related manuals for 72-8P Series

Brands by name

Popular brands

Qvis 72-8P Series, User Manual

Search results

Summary of Contents for 72-8P Series

Reviews:

Related manuals for 72-8P Series

Brands by name

Popular brands