Qvis 72-8P Series User Manual Download

Page: 229 / 233

220

10. Time display is not correct.

These are the following possibilities:



Setup is not correct.



Battery contact is not correct or voltage is too low.



Crystal is broken.

11. Device cannot control PTZ.

These are the following possibilities:



Front panel PTZ error.



PTZ decoder setup, connection or installations are not correct.



Cable connection is not correct.



PTZ setup is not correct.



PTZ decoder and device protocols are not compatible.



PTZ decoder and device addresses are not compatible.



When there are several decoders, please add 120 Ohm between the PTZ decoder A/B

cables furthest end to delete the reverberation or impedance matching. Otherwise the

PTZ control will not be stable.



The distance is too far.

12. Motion detection function does not work.

These are the following possibilities:



Period setup is not correct.



Motion detection zone setup is not correct.



Sensitivity is too low.



For some versions, there is hardware limit.

1. I cannot log in client-end or web.

These are the following possibilities:



Please make sure you have at least Windows XP installed on to your system. The

system is compatible with Vista and Windows 7 also, but only 32-bit versions.



ActiveX control has been disabled.



No DirectX 8.1 or higher. Please upgrade display card driver.



Network connection error.



Network setup error.



Password or user name is invalid.



Client-end is not compatible with device program.

Summary of Contents for 72-8P Series










































































































































































































































Search results

Summary of Contents for 72-8P Series

Reviews:

Related manuals for 72-8P Series

Brands by name

Popular brands

Qvis 72-8P Series, User Manual

Search results

Summary of Contents for 72-8P Series

Reviews:

Related manuals for 72-8P Series

Brands by name

Popular brands