20
3.5.4 Alarm output
Please check current channel status: “o” means it is not in alarming status, “
•
”
means it is in alarming status.
You can use desktop shortcut menu or click [main menu]> [alarm function]>
[alarm output] to enter the alarm output interface.
Picture 3.9 alarm output
(
Configuratio
n) Alarm is on according to the configuration.
(
Manual
) Click the all button and the according channel is alarming no matter
the channel in any state.
(
Stop
) Click the stop button and the according channel stops alarming no matter
the channel in any state.
3.5.5 PTZ control
The PTZ Operation interface is as followed. The functions include: PTZ direction
control, step, zoom, focus, iris, setup operation, patrol between spots, trail patrol,
boundary scan, assistant switch, light switch, level rotation and so on.
Note:
1). Decoder A(B) line connects with the DVR A (B) line. The connection is right.
2). Click [main menu] >[system configuration] >[PTZ setup] to set the PTZ parameters.
3). The PTZ functions are decided by the PTZ protocols.
Picture 3.10 PTZ setup
