28
(
Period
) Set the time section for common recording, The recording will start only
within the set range.
(
Record type
) Set recording type: regular, detection or alarm.
Regular
: Perform regular recording in the set time section. The video file type is “R”.
Detect
: Trigger the “motion detect”, “camera mask” or “video loss” signal. When
the above alarm is set as the opening recording, the “detection recording” state
is on. The video file type is “M”.
Alarm
: This triggers the external alarm signal in the set time section. When the
above alarm is set as the opening recording, the “detection recording” state is set
to on. The video file type is “A”.
Note
: Refer to chapter 4.3 to set corresponding alarm function.
4.2.2 Snapshot Storage
Setup snapshot parameters for different channels.At first time it's set for 24hours
snapshot continuously, pls go to Main Menu->Record->Snapshot Storage for
appropriate settings.
Note:If normal snapshot storage,pls setup Snap at Main Menu->Advanced-
>Snapshot(pls refer to chapter 4.5.1 HDD Manage)
Picture 4.2
(
Channel
) Select the related channel to set,click "all" to set all channels.
(
Presnap
) Setup presnap picture quantity before recording,default is 5 pieces.
(
Record
) Set record status,"Schedule","Manual" and "Stop"
Schedule:
Realise snapshot according to record type(regular,detect and alarm)
and period.
Manual:
No matter what the present channel is in a state,once choose "manual"
button,it will have snapshot at related channels.
Stop:
No matter what the present channel is in a state,once choose "stop" button,it
will stop snapshot at related channels.
(
Period
) Set normal record period,it only startup Snapshot Storage at set period.
(
Type
) Three types:regular,detect and alarm
(
Record type
) Three types:regular,detect and alarm
Regular: snapshot at set period
Detect:
snapshot at set period when motion detect,video blind and video loss
which are preset for snapshot enable.
Alarm:
snapshot at set period when alarm in which is preset for snapshot enable.
Note:for related alarm function,pls refer to chapter 4.3.
