33
4.3.4 Alarm input
When the system gets an external alarm signal, the alarm function is turned on.
Picture 4.11 Alarm input
Set method: refer to chapter 4.3.1. Motion detect
Note:"Advanced" button is the same as rightclick.
4.3.5 Alarm output
Refer to chapter 3.5.4.
4.3.4 Abnormal
Analysing and inspecting current software and hardware of the device: When
some abnormal events happen, the device will make a relative answer such as
show message and buzzer.
Picture 4.12 Abnormal
(
Event Type
) Selecting the abnormity you want to inspect
(
Enable
) Select it to make sure the abnormal function works
(
Show message
) Automatically an alarm cue dialog box comes up on the main
screen
(
Buzzer
) The device will have a “di di” noise when the alarm is sounding
