©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
33
[Images Color]:
Adjust the Brightness, Contrast, Hue, Saturation,
Acutance*, Gamma of video.
-
Image mode
: Transparent and True Color.
[Basic]:
- Mirror:
Set mirror to horizontally rotate the video;
- Flip:
set flip to vertically rotate the video;
-
LSC:
Means Linear Scaling When setting this to
‘Open’ the image will flatten.
- CTB:
Set CTB, the IP camera will automatically turn
on the D/N function according to the image quality.
-
WDR:
Set WDR, Enhance the image quality when
there is a strong light source (sunlight, lamps or
reflectors, etc.), light shadowing, or backlight.
-
3D-DNR:
Set 3D-DNR to get a clearer picture in low a
lighting environment. It effectively eliminates video and
color noise In low light conditions.
- 60HZ 50HZ:
In an indoor environment, if the flashing
of lamps results in the flickering of images, please
choose 50HZ or 60HZ according to the power
frequency. 50HZ suitable for a PAL system, 60HZ suit
for NTSC system;
- Iris:
Set Non-Auto Iris; this can be used with non-auto
iris lens. Set DC Auto Iris; adjust the control level of
auto-iris to control the luminous flux.
- Auto Iris Shading:
please redress the iris in the light
box if it is your first time using the auto iris function.
[IR]:
- IR Mode:
This function is only for the camera’s
infrared function. Supports three kinds of detection
mode to suit different lighting situations.
~ Time Detection:
set the times for when
the camera will switch between day and B/W
modes. The mode set will be priority setting.
~ Video Detection:
the sensor will detect the
LUX value, it will then decide whether to turn
to B/W mode or not. The larger the value,
the more sensitive the camera will be on
switching to B/W mode.
*
Digitally sharpen the video image
