©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
5
Important Safeguards and Warnings
1. Electrical safety
•
All installation and operation here should conform to your local electrical
safety codes.
•
We assume no liability or responsibility for all the fires or electrical shock
caused by improper handling or installation.
•
We are not liable for any problems caused by unauthorized modification or
attempted repair.
2. Transportation Security
•
Please ensure that the product does not endure heavy stresses, violent
vibration or contact with water during transportation, storage and
installation.
•
Please use the original packing material (or the material of the same
quality) if you need to return it to vendor.
3. Installation
•
Do not apply power to the product before completing installation.
•
Do not put any object(s) on the product.
•
Please install a proper power cut-off device during the installation
connection.
4. Qualified engineers needed
•
All the examination and repair work should be done by the qualified service
engineers. We are not liable for any problems caused by unauthorised
modifications or attempted repair.
5. Environment
•
This product should be installed in a cool, dry place away from direct
sunlight, inflammable, explosive substances and etc.
•
Please keep it away from environments that contain electromagnetic
radiation or objects that produce it.
•
Please provide sound ventilation around the device at all times.
•
Do not allow the water and other liquid to penetrate into the device if
casing has been compromised. This series product complies with the IP67
standard specified in the Degrees of Protection Provided by Enclosure.
•
Ensure lightning surge protection is in place to make sure you fully protect
camera circuitry from electrical overload.
•
Please make sure the CCD (CMOS) component is away from the radiation
of a laser beam device. Otherwise it may result in CCD (CMOS) optical
component damage.
•
It is recommended that the grounding studs of the product should be
grounded, so to further enhance the reliability of the camera.
