© Copyright Qvis ®. All documentation rights reserved.
92
Important: Do not input network default port such as TCP port number.
Figure 5-11
2) The proxy server software can be developed from the SDK. Please open the software and input
the global setup. Please make sure the auto connection port here is the same as the port you set in
the previous step.
3) Now you can add device. Please do not input default port number such as the TCP port in the
mapping port number. The device ID here shall be the same with the ID you input in Figure 5-11.
Click Add button to complete the setup.
4) Now you can boot up the proxy server. When you see the network status is Y, it means your
registration is OK. You can view the proxy server when the device is online.
Important: The server IP address can also be domain. But you need to register a domain
name before you run proxy device server.
5.7.4 Alarm
Please refer to chapter
4.7 Alarm Setup and Activation
.
5.7.5 Detect
Please refer to
Chapter 4.6 Detect.
Summary of Contents for I-ZEUS-HYBRID1
