WWW.DUALSIG.COM
21
2). Scan Calls
In Picture 3.10, click the Page Shift button to enter the PTZ control menu as
shown in Picture 3.12.
Please input the number of the scan in the value blank , then click the AutoScan
button, the PTZ will begin to work on the scan line . Click the stop button to stop.
4: Boundary Scan
1). Boundary Scan setup
Step1
: In Picture 3.10, click the multi arrow direction button to turn the PTZ to
a left hand boundary position, then click Set button to enter Picture 3.15, select
the left boundary, return to Picture 3.10;
Step2
: Please click the multi arrow direction button to adjust the PTZ to the right
boundary, click Set button to enter Picture 3.15, then select the right boundary,
return to Picture 3.10;
Step3
: Complete setup, the position of left and right boundary are now set. right
button click to exit.
Picture 3.15 Boundary Scan Setup
2). Boundary Scan Calls
In Picture 3.10, click the Page Shift button to enter the PTZ control menu as
shown in Picture 3.12.
Please input the number of the scan in the value blank , then click the AutoScan
button, the PTZ will begin to work on the scan line . Click the stop button to stop.
5: Rotating the Horizontal
Click the Horizontally Rotating button and the PTZ will begin to rotate horizontally
(relative to the original position of the camera). Click the Stop button to stop.
6: Rotate
Click on the horizontal rotating button and the PTZ will turn around.
7: Reset
The PTZ will restart and clear all the data back to 0.
8: Page Shift
In Picture 3.12, click the Page-Switch button to go to Picture 3.16 (setting the
auxiliary function). Set the auxiliary number corresponding to auxiliary switch on
the decoder.
WWW.DUALSIG.COM
