Qvis MINI-PTZ-23X-H User Manual Download

Page: 18 / 29

DAY/NIGHT

：

AUTO

THRESHOD

：

BACK EXIT

2.4.3.4 Day/Night Setting

Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can then go to the submenu.



DAY/NIGHT: Please use the left/right button on the keyboard or in the speed dome terminal menu to set.



DAY TIME: Current setup becomes valid when day/night mod

e’s time is set. Move the cursor to the DAY

TIME item and then click confirm button to go to setup. Please use the user up/down button to set the value.

After completing the setup, please click confirm button to exit and move the cursor to

‘Save’ button to save

current setup.



NIGHT TIME: Current setup becomes valid when day/night mode

’s time is set. Move the cursor to DAY

TIME item and then click confirm button to go to setup. Please use the user up/down button to set the value.

After completing setup, please click confirm button to exit and move the cursor to save button to save

current setup.



THRESHOLD: The speed dome can switch the day/night mode when it reached the threshold you set here.



SAVE: This button is for DAY TIME and NIGHT TIME setup. After you set the day time (or night time), you

need to move the cursor here and then click confirm button to save current time setup. For other setups,

you do not need to use this button.



BACK: Go back to previous menu.



EXIT: Log out system menu.

2.4.3.5 Focus Setup



FOCUS MODE: This is to set the camera focus mode. It includes several modes such as auto, manual,

semiautomatic, etc.



FOCUS LIMIT: This is to set the camera focus limit. Please use the left/right button on the keyboard or in

the speed dome terminal menu to set.



FOCUS SENSITIVITY: This is to set the camera focus sensitivity. Please use the left/right button on the

keyboard or in the speed dome terminal menu to set.



IR LIGHT FOCUS CORRECTION: This is to set the camera IR light focus correction. Please use the

left/right button on the keyboard or in the speed dome terminal menu to set.



BACK: Go back to previous menu.



EXIT: Log out system menu.

FOCUS MODE

：

AUTO

FOCUS LIMIT

：

10CM

AF SENSITIVITY

：

HGIH

IR CORRECTION

：

OFF

BACK EXIT

Summary of Contents for MINI-PTZ-23X-H






























Search results

Summary of Contents for MINI-PTZ-23X-H

Reviews:

Related manuals for MINI-PTZ-23X-H

Brands by name

Popular brands

Qvis MINI-PTZ-23X-H, User Manual

Search results

Summary of Contents for MINI-PTZ-23X-H

Reviews:

Related manuals for MINI-PTZ-23X-H

Brands by name

Popular brands