© Copyright QVIS® All documentation rights reserved.
17
Record Mode:
Set video state: Schedule, manual and stop.
Schedule:
Record according to the set video type (regular, detect and alarm) and
time section.
Manual:
Selecting this option will allow you to manually control recording
operations on each channel.
Stop:
Selecting this option will make the according channel stop recording when it
is in any set state.
Period:
Set the times during the week when you want the DVR to start and stop
recording. The recording will start and stop only in the set range.
Recording Type:
-
Regular
：
Selecting this option will initiate regular recording in the set time
section. The video file type is ‘R’.
-
Detect
：
Selecting this option will set the motion detect trigger function when
there is video blindness (blocked camera view) or video signal loss. When the
alarm is set as open recording, the ‘Detection recording’ state is set to ‘on’. The
video file type is ‘M’.
-
Alarm
：
Selecting this option will set the external alarm trigger signal in the set
time section. When the alarm is set as ‘Open recording’, the ‘Detection recording’
state is on. The video file type is ‘A’.
13.
Backup
You can back up the video files to external storage device through these setup
menus.
Note
：
The storage must be installed before the file backup. If the backup is
terminated, the already backup can playback individually.
