1. Call 95 preset or call 9 preset twice within 3 seconds, to enter into
main menu.
2. Operate the joystick up and down and move the cursor to
SYS-
TEM
】
, press
OPEN
to enter submenu.
3. Operate the joystick up and down and move the cursor to
【
ID SETTING
】
, press
【
OPEN
】
to call dome parameter setting menu.
【
S/N
】
: Series number of the dome
【
CONF
】
: Confirm S/N and input the same number with S/N
【
ID
】
: Set dome address (ID range: 001-255)
【
【
】
1.If [S/N] and [CONF] are different, the above operation
can't be implemented.
2.The dome address should be set as 255 by setting SW1
as ON at first, there will be display this item [DOME ID]
3.After setting dome address, the dome need to restart, then
the dome address will be effective.
5. 4 ID Setting
NOTICE
S / N : 0025
CONF : 0000
ID : 001
BAUDRATE : 9600
BACK
EXIT
ID SETTING
7
The shortcut of Dome ID setting
:
call 101-116 preset twice within
3 seconds, to set dome ID as 1 to 16. For example, call 103 preset
twice within 3 seconds, then dome ID be setted as 3.
SYSTEM
MAIN MENU
SYSTEM
CAMERA
FUNCTION
INFRARED LED
EXIT
SYSTEM SETTING
DOME INFO
ID SETTING
AUTO RUN
DEFAULTS
BACK
EXIT
1
2.
【
】
【
】
Systematic motion controlling may control a series of canonical
movement of the dome, and plays an important role in controlling
the image of the dome.
. The system enters into the main menu by calling 95 preset or by
calling 9 preset twice within 3 seconds.
Operate the joystick up and down and move the cursor to
SYST-
EM
, press
OPEN
to enter submenu.
5. 5
AUTO RUN
AUTO RUN
AUTO FLIP ON
PROPORTION ON
POWER UP RUN NONE
IDLE RUN
BACK
EXIT
SYSTEM
Operate the joystick up and down and move the cursor to
Operate
the joystick
"
", and
"
"
【
PANT-
ILT SETTING
】
, press
【
OPEN
】
to enter
【
AUTO FLIP
】
.
up and down to choose ON to open auto flip
choose
OFF to close auto flip . Press
【
OPEN
】
to save.
When manually adjusting, for far focus situation, the dome
responds at a high-speed so that touching rocker slightly may
make picture move rapidly, thus cause the picture to lose. To
base on humanized design, the dome automatically adjust pan
and tilt rotation according to zoom near and far, which make it
is convenient to operate manually run after object.
OPERATION KNACKS
Operate joystick and move the cursor to
【
PROPORTION
】
,
press
【
OPEN
】
to enter "proportion" setting, operate joystick up
and down to choose, if choosing
【
ON
】
, it means to open proportion
pan. If choosing
【
OFF
】
, it means to close proportion pan , press
【
OPEN
】
to save.
MAIN MENU
SYSTEM
CAMERA
FUNCTION
INFRARED LED
EXIT
SYSTEM
DOME INFO
ID SETTING
AUTO RUN
DEFAULTS
BACK
EXIT
5. 5.1
AUTO FLIP
8
5. 5.2 PROPORTION
