5. 5. 3 Power up run
The dome startup to run actions after self-testing, if nobody
intervenes with it , the dome will repeatedly run this action continu-
ously , if default sets as
【
NONE
】
.
Operate joystick, move the cursor to
【
POWER UP ACTION
】
:
press
【
OPEN
】
to jump to the following choice, tilt up/down joystick
to choose power up action , press
【
OPEN
】
to save.
● 【
NONE
】
: none action
● 【
AUTO
】
: the dome resumes the primary action and
direction before power up.
●【
PRESET
】
: use preset
●【
SCAN
】
: run scan
● 【
PAT
】
: run pattern
● 【
TOUR
】
: run tour
"
"
9
SYSTEM
AUTO RUN
AUTO FLIP ON
PROPORTION ON
POWER UP RUN NONE
IDLE RUN
BACK
EXIT
MAIN MENU
SYSTEM
CAMERA
FUNCTION
INFRARED LED
EXIT
SYSTEM
DOME INFO
ID SETTING
AUTO RUN
DEFAULTS
BACK
EXIT
This setting allows the dome to run an appointed action after
it enters vacancy for a few time (1-240minutes). If default sets as 0,
it means not to run this action.
1. Operate the joystick up and down and move the cursor to
, press
OPEN
to tilt up/down joystick to set
idle time, the range is 0-240 (minute), press
OPEN
to save.
PARK ACTION
is running action at park time, when
PARK
TIME
sets as 0, this item can't be set.
2. Operate the joystick up and down and move the cursor to
ACTION
, press
OPEN
there will be a sign
in the front
of
, the cursor jump to right, after tilting up/down
joystick to choose "idle action", there are options for choosing as
follows, press
OPEN
to save.
【
I
DLE
RUN
】
【
】
【
】
【
】
【
】
【
IDLE
】
【
】
“
”
【
I
D L E
A CTION
】
【
】
5. 5. 4 IDLE RUN
● 【
NONE
】
: (default)
● 【
PAT
】
:
● 【
TOUR
】
:
● 【
SCAN
】
:
●【
PRESET
】
:
no action
run pattern
run tour
run scan
use preset
IDLE RUN
IDLE TIME : 000
IDLE ACTION : NONE
BACK
EXIT
5. 6 Defaults
1
2.
【
】
【
】
3.
【
DEFA-
ULTS
】
【
】
● 【
CLEAR ALL PRESETS
】
●
【
CLEAR ALL PATTERNS
】
●
【
CLEAR ALL TOURS
】
●
【
FACTORY DEFAULTS
】
:
●
【
RESTART
】 ：
restart the dome
. The system enters into the main menu by calling 95 preset or by
calling 9 preset twice within 3 seconds.
Operate the joystick up and down and move the cursor to
SYST-
EM
, press
OPEN
to enter submenu.
Operate the joystick up and down and move the cursor to
, press
OPEN
to enter submenu, as left picture shows
resume the factory default.
Run this function, the camera parameter and system parameter will
resume before production, clear all windows and alarm setting.
Please be cautious to use this function.
DEFAULTS
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL TOURS
FACTORY DEFAULTS
RESTART
BACK
EXIT
NOTICE
Once clear all commands in the controlling menu,
they don't resume, so please be careful of using.
10
SYSTEM
MAIN MENU
SYSTEM
CAMERA
FUNCTION
INFRARED LED
EXIT
SYSTEM
DOME INFO
ID SETTING
AUTO RUN
DEFAULTS
BACK
EXIT
