13
Function setting
6. 3
Pattern
2
【
】
【
】
3
【
】
【
】
4
【
】
【
】
5
【
RECORD
】
【
】
【
】
6
【
】
【
】
Pattern is built-in function in camera; the speed dome can record
tracks that are no less than 180s. (A series of pan/tilt controlling and
lens controlling command). Each dome may set up to 4 patterns.
1. The system enters into the main menu by calling 95 preset or by
calling 9 preset twice within 3 seconds.
. Operate the joystick up and down and move the cursor to
FUN-
CTION SETTING
, press
OPEN
to enter submenu.
. Operate the joystick up and down and move the cursor to
PAT-
TERN
, press
OPEN
to enter menu "Pattern".
. Choose pattern number: move the cursor to
PATTERN NUMBER
,
press
OPEN
, the pattern you choose as current one, the following
operations aim at the current pattern.
. Define current pattern tour: move the cursor to
PAT-
TERN
, press
OPEN
to set pattern track, move the image
random, and draw the focus. Each dome has a tour that is no less than
180s, a series of park time, magnification, focus will be recorded,
press
OPEN
to save.
. Run pattern: operate joystick to
RUN PATTERN
, press
OPEN
to run, the dome will continuously and repeatedly record
the specific track.
PATTERNS
PATTERN NUMBER 1
RECORD PATTERN
RUN PATTERN
CLEAR PATTERN
BACK
EXIT
● 【
PATTERN NUMBER
】
● 【
PATTERN
】
●
【
RUN PATTERN
】
●
【
CLEAR PATTERN
】
RECORD
FUNCTION
PRESETS
SCAN
PATTERNS
TOUR
BACK
EXIT
MAIN MENU
SYSTEM
CAMERA
FUNCTION
INFRARED LED
EXIT
6. 4 Tour
TOUR
PO-S-TM PO-S-TM
00-00-00 00-00-00
00-00-00 00-00-00
00-00-00 00-00-00
00-00-00 00-00-00
BACK
EXIT
Tour is the built-in function in the speed dome, it will arrange
the presets into the queue of auto-tour, and can set how long it will
park at preset. Operate auto-tour is a process of incessantly transfer
each preset. One tour can store 32 presets at most.
The system enters into the main menu by calling 95 preset or by
calling 9 preset twice within 3 seconds.
Operate the joystick up and down and move the cursor to
FUNCTION
, press
OPEN
enter submenu.
Operate the joystick up and down and move the cursor to
TOUR
, press
OPEN
to enter menu "tour".
5 Run tour: Operate joystick, move the cursor to
RUN TOUR
,
press
OPEN
to exit the menu, it starts to run tour.
1.
2.
【
】
【
】
3.
【
】
【
】
4. Set tour: move the cursor to
【
EDIT TOUR
】
, press
【
OPEN
】
to set tour interface,
【
PO-S-TM
】
set preset, speed and time, press
【
OPEN
】
, the first dwell is activated , tilt up/down joystick to
choose preset number, the preset numerical value should be within
1-80 preset, a tour can set up to 24 presets. Press
【
OPEN
】
,the
cursor jump to the next dwell, tilt up/down joystick to choose
current arrival preset speed , total 8 level of speed , increasingly
from level1 to level 8. Press
【
OPEN
】
, the cursor jumps to the
next dwell, tilt up/down joystick to set current preset maintaining
time, 60 seconds maximum. If set the presets of the second line ,
move the cursor to the second line, press
【
OPEN
】
to continue
edit. Press
【
OPEN
】
to save after setting, press
【
CLOSE
】
to exit.
.
【
】
【
】
● 【
TOUR NUMBER
】
● 【
TOUR
】
●
【
RUN TOUR
】
●
【
CLEAR TOUR
】
EDIT
14
TOUR
TOUR NUMBER 1
EDIT TOUR
RUN TOUR
CLEAR TOUR
BACK
EXIT
FUNCTION
PRESETS
SCAN
PATTERNS
TOUR
BACK
EXIT
MAIN MENU
SYSTEM
CAMERA
FUNCTION
INFRARED LED
EXIT
Function setting
