WWW.DUALSIG.COM
22
Picture 3.12 PTZ Control
2: Cruise between Points
A PTZ camera can be set to cruise between a series of preset points. This is called
a cruise. To set the PTZ up to do this is as follows:
1). Cruise Between Points Settings
A cruise line is a set up of multiple preset connected points, the setup procedure
is as follows:
Step 1
: In Picture 3.10, use the Direction key to turn the PTZ to a designated
location, click the settings button to enter Picture 3.13,
Step 2
: Click the Tour button, enter the tour number into the Patrol Number
box if it isn't already showing and then click Add preset. The number
of presets in the tour will show in the Preset box.
Step 3
: repeat steps 1 and 2, until you have set out all the preset designated
cruise positions
Remove Preset
: Please input the preset value in the blank, click Remove Preset
button, then remove the preset points.
Remove Cruise Line
: Input the number of cruise line, click Remove Cruise Lines
button, then remove the cruise lines set.
Picture 3.13 Cruise Between Points Setting
s
2). To view Cruise between Points
In Picture 3.10, click the Page Shift button to enter the PTZ control menu as
shown in Picture 3.12. Please input the patrol number of the cruise in the value
blank, then click the Cruise between Points button. The PTZ will cruise from point
to point on the cruise line. Click the Stop button to stop the cruise.
WWW.DUALSIG.COM