WWW.DUALSIG.COM
35
4.4.2 Encode setup
Set the video/audio code parameters: video ile, remote monitoring and so on.
Set every independent channel’s coding parameter in the left part, and set the
combine encode parameter in the right part.
Note
: Combine encode introduces video compression technique which combines
and compresses multi-channel’s video to a special channel. Applying for multi-
channel playback simultaneously, Dial-up multi-channel real-time monitor,
mobile monitor and so on.
Picture 4.16 Encode setup
(
Channel
) Choose the channel number.
(
Compression
) Standard H.264 main proile.
(
Resolution
) Resolution type:D1/ HD1/CIF / QCIF.
(
Frame Rate
) P:1 frame/s~25 frame/s; N: 1 frame/s~30 frame/s
(
Bit Rate Type
) You can choose limited code stream or variable code stream.
When you choose the variable code stream there are six image quality options.
(
Bit Rate
) Set the code stream value to modify the image quality. The larger code
stream value the better image quality.
D1(1000~1500kbps) ,CIF(384~1500kbps) , QCIF(64~512kbps)
(
Video/Audio)
When the icons are all displayed in reverse, the video ile is video
and audio multiplex stream.
Combine Enable
(
Combine Enable
) When the icons are all in reverse displayed, opening
combination coding functions.
(
Mode
) multi-channel playback is used in all channels to playback simultaneously,
and the narrowband transmission is used in multi-channel real-time remote
monitoring simultaneously at narrowband state, especially used with a mobile
screen.
WWW.DUALSIG.COM
