WWW.DUALSIG.COM
36
4.4.3 Network setup
Picture4.17 Network
(
Net Card
) You can choose cable network card or wireless network card.
(
DHCP Enable
) Obtain IP address automatically (not suggested)
Note
: DHCP server is preinstalled.
(
IP address
) Set the IP address. Default: 192.168.1.10.
(
Subnet mask
) Set the subnet mask code. Default: 255.255.255.0.
(
Gateway
) Set the default gateway. Default: 192.168.1.1.
(
DNS setup
) Domain Name Server. It translates the domain name into IP address.
The IP address is offered by network provider. The address must be set and
reboot then it works.
(
TCP port
) Default: 34567.
(
HTTP port
) Default: 80.
(
HS Download
)
(
Transfer Policy
) There are three strategies: self-adaption, image quality
precedence and luency precedence. The code stream will adjust according to the
setup. Self-adaption is the tradeoff between the image quality precedence and
luency precedence. Fluency precedence and self-adaption are valid only when
the assistant code stream is turned on. Otherwise the image quality precedence
is valid.
4.4.4 NetService
Choose the network service option and click the set button to conigure the
advanced network functions or double click the service button to conigure the
parameters.
Picture 4.18 NetService
WWW.DUALSIG.COM
