WWW.DUALSIG.COM
41
(
Enable
) Select this to make sure the abnormal function is working
(
Port
) This is the port to enable mobile monitoring. You will need to make a router
map of it if you want to view everything by mobile
(
UPNP
) UPNP protocol can set auto port forwarding on the router, make sure
UPNP is running on the router before useing it.
Picture 4.27
(
Enable
) Choose Enable to make sure all UPNP settings available
(
HTTP
) Route will automatically distribute HTTP port for the device,when IE
viewing,it need this port(eg. 60.12.9.26:66)
(
TCP
) Router will automatically distribute TCP port for the device,when monitoring
via CMS,it need this port.
(
MobilePort
) Router will automatically distribute Mobile Port for the device,when
mobile monitor,it need this port.
(
WIFI
) Through wireless network to connect with the DVR.
(
Search
) search SSID of wireless LAN
(
Enable
) Select it to enable the function
(
SSID
) SSID name
(
Password
) password of WIFI
(
IP Address
) IP address of WIFI
(
Subnet Mask
) Subnet mask of WIFI
(
Gateway
) Gateway of WIFI
WWW.DUALSIG.COM
