WWW.DUALSIG.COM
43
4.4.6 PTZ setup
Picture 4.29 PTZ setup
(
Channel
) Choose the dome camera input channel.
(
Protocol
) Choose the corresponding dome protocol. (PELCOD as an example)
(
Address
) Set as the corresponding dome address.
Default
: 1.
(
Note
: The address must be consistent with the dome address.)
(
Baud rate
) Choose the corresponding dome baud rate length. You can control
the PTZ and vidicon.
Default
: 115200.
(
Data bits
) Include 5-8 options.
Default
: 8.
(
Stop bits
) Include 2 options.
Default
: 1.
(
Parity
) Include odd check, even check, sign check, blank check.
Default
: void.
4.4.7 RS232 setup
Picture 4.30 RS232 setup
(
Serial Port Function
) Common serial port is used to debug and update program
or set up speciic serial port.
(
Baud rate
) Choose the corresponding baud rate length.
(
Data bits
) Include 5-8 options.
(
Stop bits
) Include 2 options.
(
Parity
) Include odd, even, mark, space.
WWW.DUALSIG.COM
