WWW.DUALSIG.COM
49
Clue
:
means that the hard disk is normal.
X
means that the hard disk is not working.
-
means that there is no hard disk.
If the user needs to change the damaged hard disk then you must shut down the
DVR and remove all the damaged hard disks before installing a new one.
* behind serial number means the current working disk such as 1*. If the
corresponding disk is damaged, the information will show as “?”.
4.6.2 BPS
Displays the code stream (Kb/S) and hard disk capability (MB/H) in real time. It
displays as a wave sketch map.
Picture 4.44 BPS
4.6.3 LOG
Look up the system log according to the set mode.
Log information includes: the system operation, the coniguration operation,
data management, alarm affairs, recording operations, user management, ile
management and so on. Set the time section to look up and then click the look
up button. The log information will display as a list. (one page is 128 items) Press
Page up or Page down button to look up and press delete button to clear all the
log information.
Picture 4.45 LOG
WWW.DUALSIG.COM
