I
NSTALLATION
1.
Assemble the airVGA with HDMI WPS by connecting its wireless antenna to the
base-unit and its power adaptor to a power outlet. Connects AIRVGA to the
projector’s VGA port (or HDMI port). By default, the VGA port is active. To use
the HDMI port, it must be change in the Projection Setup (see manual).
2.
Make sure your computer’s wireless connection is active.
3.
Turn-on the projector, then turn-on AIRVGA. Wait until you see the screen below
on your projector.
From the projector’s screen, note the 4-digit Log-in Code, SSID and Server IP
address. You will need this information to install the player software.
4.
Connect your computer to AIRVGA wireless network (SSID: WPS).
5.
Open your Internet Explorer and type the Server IP shown on the screen (default is
http://192.168.100.10
) at the address bar and you’ll see the screen below.
6.
Click on “Download”. Select the proper software for your computer operating
system. Click on the “Download” and select “Run” at the prompt and follow the
instruction to install the player software. A desktop icon will be created.
7.
At your desktop, double-click on WPS desktop icon. The program will search the
network and at the prompt, enter the 4 digit log-in code. (Note: If you have a 3
rd
party firewall software, make sure it allows WPS software to pass through)
8.
Click “Play” to start sending your screen to the projector.
For more information on Windows, Windows Mobile and Apple/Mac support,
please refer to the manual. Please visit our website for the latest setup
guides/manual and firmware updates.
