AUTO ANSWER ON/OFF
Factory default setting is Auto
Answer OFF.
With Auto Answer set to OFF,
when the phone is on cradle, you
cannot simply pick up the phone to
answer incoming call, you must press
PHONE to answer the call. This allows
you to review the Caller ID information
before answering. However, if you
prefer to have your Handset
automatically answer the call when
removed from the Base cradle:
Select AutoAns On/Off (Menu
selection #7). The Handset will display:
Press ON (or OFF if you’re canceling
Auto Answer), then SAVE. The screen
will display Setting Updated, and return
to the idle mode display.
SET TONE /PULSE
Your QW1734 is preset for tone
dialing.To change the dialing mode
setting, choose SET TONE/PULSE
(Menu selection #8), the screen will
display:
Press TONE or PULSE, depending
on the requirements of your local
telephone provider.If you are not sure,
contact your local phone company.
Press SAVE. The screen will confirm
that the dialing mode is updated, and
then return to the idle mode display.
DELETE MSG ICON
Refer to MESSAGE WAITING
INDICATOR on page 34 for an
explanation of this feature.
3 2
OTHER MENU SETTINGS
Summary of Contents for QW1734
Page 12: ...1 2 HANDSET LAYOUT...
Page 13: ...1 3 BASE LAYOUT...
