ADDITIONAL OPERATING TIPS
OUT OF RANGE INDICATION
When the handset is in Phone On
mode and moved to a point where it and
the Base Unit can no longer
communicate, the Handset will beep
twice and display OUT OF RANGE:
and attempt to re-link with the Base. If
this occurs while you’re on a call, move
closer to the Base Unit.
If the Handset does not re-establish
contact with the Base within 30 seconds
of losing contact, the Handset will
automatically drop the call and turn off.
If you walk out of range while the
Handset is not in use, the Handset will
beep twice and display OUT OF
RANGE until the user presses any key.
NOTE: If the Base Unit is without
power, the Handset will behave as if it
is out of range. Therefore, if the
handset beeps, the display OUT OF
RANGE occurs, and moving closer to
the Base does not help, check the
Base Unit to make sure it has power.
MESSAGE WAITING
INDICATOR (for use with
Voicemail)
Your QW1734 is capable of detecting
a visual Message Waiting signal,
generated by many phone service
providers. If you subscribe to Voicemail
service from your local telephone
company, and a visual message waiting
signal is provided, the QW1734 will
display
on the right side of the
Handset LCD to alert you to new,
unplayed messages.
On the Base, the red MESSAGE LED
will light up to alert you to new unplayed
messages.
Once you have reviewed all of your
new voicemail messages and hang up
the phone, the QW1734 will turn off the
Handset and Base indicators
automatically. Note that there is a delay
for the indicators to turn off, as the
QW1734 is waiting for an update signal
from the telephone network.
After all new voicemail messages have
been reviewed, if the MESSAGE
WAITING indicator (icon or Base LED)
remains on, you can manually clear the
indications as follows:
•
Press MENU, scroll to 9. Del MSG
Icon. Press ENTER
•
Press YES to turn off the Handset
icon and Base LED.
3 4
Summary of Contents for QW1734
Page 12: ...1 2 HANDSET LAYOUT...
Page 13: ...1 3 BASE LAYOUT...
