35
NE
DE
RL
AND
S
ENGLI
SH
DEU
TS
C
H
3. CONTROLS & DISPLAY
Trip reset
Trip reset can only be done in the menu. Press ' ' quickly 2 times to get
in the menu. Scroll down with ' - ' to ‘
trip reset’. Press ' ' to confirm.
Press ' + ' to toggle to ‘YES’. Press ' ' to confirm and reset your trip data.
Password
Your bike has the possibility to be electronically locked with a password.
Please do so with careful instructions from your dealer. Not doing this
correctly can lock the bike from being used.
info
Range is always an estimation and it is based on the usage
of your last few kilometers just like in your car. If your situation
changes (i.e. you are driving uphill where you were driving
downhill before) the range can decrease or increase more or less
than the actual kilometers driven. It is advised to familiarise
yourself with the accuracy of this function and always keep an
eye out on your battery level.
info
More settings can be done in the menu. Not all are explained in
this manual, as some settings require the expertise of your dealer.
Your dealer can provide you with more information of these settings
if needed.
Clock
Shows the current time (can be set in menu).
USB port
Your display is fitted with a USB charge port. If you attach your device,
the display will show to indicate that it is charging. The maximum
output is 500mAh.
Lighting
Can be turned on/off by pressing 'LIGHT' for 2 seconds. Your bike is
also fitted with a light sensor which can automatically turn on your
light. If you press 'LIGHT' manually one time the light sensor will not
automatically turn your light on/off anymore, until you restart the
display. The sensitivity of the sensor can be set in the menu. Remember
that if your bike runs out of battery your lights will also stop working.
Power assist levels
The bike is fitted with 5 power levels . Toggle between them with '+' / '-'
Your dealer can also set your display to 3 or 9 levels if desired. This won’t
affect the max. support power, but increases or decreases the amount
of steps between min. and max. support power The higher the power
level, the stronger the motor assistance. In power level 0 the motor
gives no assistance but you can use the display of the bike. Please note
that the battery runs out of power faster when using a high power level
than with a low power level. The highest level is very powerful and only
meant for hills, slopes and tough circumstances.
Walk assist
Your bike can support you up an inclination when you are walking next
to it. Press ' - ' a couple of times until the walk symbol appears. After that
keep ' - ' pressed to activate the walk assist.
Summary of Contents for Premium MN7D
