MENU QUICK REVIEW |
15
9. [Enter Menu]+[9]: BEEP
Turns key beeps OFF or ON.
10. [Enter Menu]+[1]+[0]: R-DCS
DCS receive/squelch settings. Options include
the D023N-D754N positive sequence and the
D023I-D754I reversed sequence.
11. [Enter Menu]+[1]+[1]: R-CTCS
CTCSS receive/squelch settings. Selectable
from 67.0HZ-254.1HZ. you can use the key-
pad to quickly enter in the desired setting.
12. [Enter Menu]+[1]+[2]: T-DCS
DCS transmit settings. Options include the
D023N-D754N positive sequence and the
D023I- D754I reversed sequence.
13. [Enter Menu]+[1]+[3]: T-CTCS
CTCSS transmit settings. Selectable from
67.0Hz-254.1Hz. you can use the keypad to
quickly enter in the desired setting.
14. [Enter Menu]+[1]+[4]: DTMFST
DTMF transmit tone settings.
•
OFF :
No tones heard through the speaker
when transmitting.
•
KEY :
Only manually keyed DTMF codes
are heard.
•
ANI
:
Only automatically keyed DTMF
codes are heard.
•
BOTH :
All DTMF codes are heard.
15. [Enter Menu]+[1]+[5]: BCL
Busy channel lock-out. If you have this turned
on the transmitter will not transmit if a channel
is receiving at the time.
16. [Enter Menu]+[1]+[6]: SC-ADD
Scan settings.
•
OFF:
This removes the channel from the
scan list.
•
ON:
This adds the channel to scanning list.
17. [Enter Menu]+[1]+[7]: SC-REV
Scanning settings.
•
TO :
Time out scan, after the stopping on
an active signal, scanning will resume
after a few seconds.
•
CO :
Scanning will stop on a carrier channel
and will resume after the carrier chan-
nel stops receiving.
•
SE :
Scanning will stop once an active carri-
er channel is found.
Summary of Contents for KT-8900D
Page 1: ...Mini color screen MobileRadio USER S MANUAL...
Page 2: ......
Page 41: ...Mini color screen MobileRadio...
