®
R&M Materials Handling, Inc
STAGEMAKER
®
COMPACT Concert Hoist
Springfield, Ohio USA
SM10 Installation & Maintenance Manual
: 800 955-9967
web:
www.rmhoist.com
June 2006
5 June 2006 1 SM10-M & I MANUAL - 2006 - 0.doc.
1
INTRODUCTION
1.1
Contact Information
Please do not hesitate to use the following contact information in the event that you may need assistance:
R&M MATERIALS HANDLING, INC.
4501 Gateway Boulevard
Springfield, OH 45502
General Telephone:
937 - 328-5100
Toll Free Telephone (US):
800 - 955-9967
General Fax:
937 - 325-5319
Parts Dept. Fax (US):
800 - 955-5162
Parts Dept. Fax (other):
937 - 328-5162
Website:
Warranty
All sales are subject to the R&M MATERIALS HANDLING, INC. Standard Terms and Conditions of Sale
and Product Warranty. Copies are available upon request from R&M MATERIALS HANDLING (also
available from R&M’s website) and are expressly incorporated by reference hereto.
1.3
Disclaimer
This Manual has been prepared by R&M MATERIALS HANDLING, INC. to provide information and
suggestions for hoist installation, maintenance, and inspection personnel. This manual should be used in
conjunction with the
STAGEMAKER
®
Concert Electric Chain Hoist Operator’s Manual to teach safe
operating practices to all personnel associated with hoist operations and maintenance.
It is NOT intended that the recommendations in this manual take precedence over existing plant / site
safety rules and regulations or OSHA regulations. However, a thorough study of the following information
should provide a better understanding of proper installation, maintenance, and inspection procedures that
are to be followed in order to afford a greater margin of safety for people and machinery in the area of
hoist operations.
It must be recognized that this is a manual of recommendations for the Hoist Installation, Maintenance,
and Inspection personnel and its use is permissive not mandatory. It is the responsibility of the hoist
owner to make personnel aware of all federal, state, and local codes and regulations. The owner is
responsible for providing instruction and insuring that certain installation, maintenance, and inspection
personnel are properly trained.
