2014-09-30
Page 14 of 34
R-Biopharm AG
Changing the language of the RIDA
®
CUBE SCAN application
The language of the application is automatically set according to the language of the operating system of
the Tablet. It can be changed by pressing the home button on the Tablet PC (the launcher appears),
then pressing
to open the settings. Swipe down and select
Language and input
in the category
“Personal”. Tap
Language
and choose a language. Press the home button to return to the launcher.
Note:
the RIDA
®
CUBE SCAN application supports several languages. If you choose a language in the
system settings that is not supported by the
RIDA
®
CUBE SCAN
app English will be used.
How to switch the RIDA
®
CUBE SCAN Laboratory Photometer ON
The Instrument is switched on by plugging the power cable into the socket. This launches the
Instrument’s automatic start-up and warm-up processes. Please wait for these to be completed
(approximately 10 minutes).
When operating the Instrument:
•
The door protects the analysis system from dust, dirt and humidity. Empty the
door’s cartridge chamber after every analysis and keep it closed when the
Instrument is not in use.
•
The door opens automatically. Do not attempt to open the door manually!
•
If an error message appears during an analysis, please consult the
“Troubleshooting” section on page 29.
The automatic start-up and warm-up processes
1. Warm-up menu
2. Main Menu
The automatic start-up procedure (indicated by the flashing green LED) starts as soon as the Instrument
is connected to the power supply. The Instrument is warmed up to its proper working temperature in
approximately 10 - 15 minutes.
As soon as the initialization of the optical unit is completed, the
button turns from b/w to color and
reacts to tapping. The Instrument is now operational.
