33
EN
Juic
e A
r
t N
e
w
J
Use
ASSEMBLING
When using for the first time or after a long
period of disuse carefully clean all the parts
(see “Cleaning” section). Rinse thoroughly
and dry the parts before using them again.
To correctly assemble the appliance:
Remove any label or stickers.
Before you assemble the slow juicer, ensure that the power cord is
unplugged.
1. Place the motor base on a flat, dry and stable surface.
2. Underneath the juice bowl is the pulp extraction silicon,
which is used to remove the pulp from the spout of the
juicing bowl. Ensure that the silicon is firmly inserted
into the whole.
3. Place the juicing bowl (4) on top of the
motor base (1) ensuring the 3 holes (x) of
the juice bowl align with the 3 screens on
the motor base.
Press down the separator (4) and rotate
in a clockwise direction, then lock it into
position.
4. Assemble the basket (6a/6b) into the support (5), then
place this assembled into the separator (4).
> > > >
x
1
6a/6b
5
4
4
Summary of Contents for 110900
Page 2: ......
Page 10: ...10 IT Juice Art New 8 7 6b 5 1 4b 4 2 4a 11 8 9 1a 4b 4a 10 6a 3...
Page 32: ...32 EN Juice Art New 8 7 6b 5 1 3 4b 4 2 4a 11 8 9 1a 4b 4a 10 6a...
Page 47: ......