27
EN
I
ndustrial blender
• To avoid dangerous overheating, we recommend you to unwind the
power cord for all of its length. The appliance must not be kept in con-
tinuous operation for more than 2 minutes.
Since the appliance must perform processing in succession, take breaks
between the cycles reducing the time of continuous operation.
• Before inserting the plug in the power socket, make sure that the switch
(8) is on “0”.
☞
Do not insert foods whose temperature is higher than 50°C in the
graduated blender jug (3).
Insert foods to blend in the graduated blender jug (3) after cutting them
into small pieces, then add liquid paying attention
to NEVER exceed the
1750 ml capacity
.
NEVER
let the appliance work if the graduated blender jug (3) is empty.
NEVER insert hands, forks spoons or other tools to perform with-
drawals or interventions in the graduated blender jug (3) if the
appliance is active.
• To remove food residues from the graduated blender jug (3) use ap-
propriate tools only. Do not use fingers.
While turning off the appliance (switch on “0”) pay attention to the
blades, which will rotate for another few seconds.
Turn off the appliance (OFF: switch knob on “0”) before approaching
to the parts that move during use.
☞
Before placing or removing the graduated blender jug (3) from the
motor base (1), make sure that the switch (8) is on “0”.
Do not damage the blades (4) by blending or processing excessively hard
food (coffee, shells, bones, etc.).
• Do not try to sharpen the blades, change the whole group if necessary.
The blades (4) are very sharp; handle them carefully.
☞
Do not use the graduated blender jug (3) in the microwave oven.
Summary of Contents for INDUSTRIAL BLENDER
Page 2: ......
