41
EN
I
ndustrial blender
P
Additional warnings
- Before connecting the appliance, make sure that the data on the plate
correspond to those of the electricity distribution network . The plate is located
on the bottom of the unit body.
- In case of incompatibility between the socket and power cable plug, have
the socket replaced with a suitable type by a qualified professional who will
also have to make sure that the section of the cord is suitable for the power
absorbed by the appliance.
We do not recommend the use of adapters, multiple sockets and / or extensions.
When their use is absolutely necessary, you must use only simple or multiple
adapters and extensions that comply with current safety standards, taking
care not to exceed the range limit.
-
The use of an electrical appliance requires the observance of some fundamental
rules.
In particular:
- do not touch or use the appliance with wet or damp hands or bare feet;
- do not pull the power cord or the appliance itself to remove the plug from
the socket;
- do not allow the appliance to be used by children or unfit persons without
supervision.
-
In case of failure and/ or malfunction, turn it off and do not tamper with it.
For repairs only contact an authorized dealer.
Failure to comply with the above may compromise the safety of the device.
-
If you decide not to use this appliance again you must make it inoperative by
cutting the cord after removing the plug from the socket.
It is also recommended to make harmless those parts which may constitute
a danger, especially for children who could use an abandoned appliance for
their games.
- The installation must be carried out according to the manufacturer’s
instructions. Improper installation may cause damage to persons,
animals or property in respect of which the manufacturer can not be held
responsible.
-
To avoid dangerous overheating it is recommended to unroll the power cord
for its entire lenght and use the device as recommended in the paragraph
“Instructions for Use”.
-
DO NOT allow it to be unnecessarily connected to the power. Disconnect the
plug from the outlet when the appliance it’s not used.
Summary of Contents for INDUSTRIAL BLENDER
Page 2: ......
