PAGE 8
CONTROLS AND FUNCTIONS
SEE FIGURES (1-4) ON PAGE 7
SEE FIGURE 1
1. MAIN POWER SWITCH:
Turns the machine on and off.
2. FORWARD/REVERSE SWITCH (RED):
Controls the direction of the Traction Drive, Pull back for reverse.
3. SPEED CONTROL KNOB:
Controls the speed of the Traction Drive, Turn counter-clockwise to reduce speed.
4. LCD SCREEN:
Lists functions and settings of the machine. (See Page 9)
5. MENU CONTROL:
Scrolls through different options on the LCD display, there are 3 different screens.
6. SCRUB DECK DOWN PRESSURE SWITCH:
Controls the pressure on the Scrubdeck, push forward for more down pressure.
7. SCRUB DECK SWITCH:
Raises and lowers the Scrubdeck.
8. SOLUTION FLOW CONTROL KNOB:
Turn clockwise to reduce & counter-clockwise to increase flow.
SEE FIGURE 2
9. SQUEEGEE LIFT LEVER:
Raises and lowers Squeegee.
10. SPRAY JET (BLUE) (OPTIONAL):
Activates Spray Pump for remote Spray Wand.
11. ELECTRIC SQUEEGEE LIFT (GREY) (OPTIONAL):
Electronically raises and lowers Squeegee.
12. SIDE BROOM SWITCH (YELLOW) (OPTIONAL):
Turns on the Side Brooms.
13.
"ON BOARD"
SOAP SYSTEM (WHITE) (OPTIONAL):
Dispenses soap into Solution Tank.
14. EMERGENCY STOP (OPTIONAL):
Shuts off power to the machine.
15. CHARGER PORT:
Red 50 used to receive charger input.
NOTE:
Only use charger provided
(24 VOLT ONLY!)
.
16. KEY SWITCH (OPTIONAL):
Turns power on to the machine.
17. SERIAL NUMBER PLATE:
Machine identification
.
18. WARNING PLATE:
Detergent/Water warning.
19. WARNING PLATE:
Explosion warning
.
SEE FIGURE 3
20. TRACTION DRIVE:
Propels machine forward/backward
.
21. SOLUTION FLOW VALVE:
Controls solution flow rate.
22. SOLUTION FILTER:
Filters water solution prior to scrubbing
.
SEE FIGURE 4A
23. DRIVE BUTTON:
Depress to drive forward, release to stop. (starts & stops the drive motor)
24.
"DRAIN SAVER"
STRAINER
:
Helps prevent clogging of drain ports
.
25.
VAC SCREEN:
Protects Vac Motor from debris.
26. CASTER:
Twin casters for stability.
27. MAIN TIRE:
Drive Tires.
28. JAWS:
Protects Scrubdeck from collision damage.
29. POLYURETHANE ROLLERS:
Helps protect machine when scrubbing near walls.
30. TANK-IN-TANK:
Solution/Recovery Tank(30 gallons capacity each).
31. SOLUTION FILL LID:
Fill port for filling Solution Tank.
32. RECOVERY LID:
Used for flushing out Recovery Tank area with fresh water.
SEE FIGURE 4B
33. CLEAR COVER:
For viewing inside Recovery Tank area.
34. CONTROL PANEL:
Machine controls and access to electrical components.
35. RECOVERY DRAIN HOSE:
Allows for controlled draining of Recovery Tank.
36. SOLUTION LEVEL INDICATOR & DRAIN TUBE:
Shows precise level of cleaning solution in Tank & Drain Port.
37.
"ON BOARD
" BATTERY CHARGER (OPTIONAL):
Recharges Batteries.
38. SQUEEGEE BLADE:
Recovers dirty water from floor to be recovered by Vacuum Hose.
39. VACUUM HOSE:
Vacuumizes Squeegee.
NOTE
: Keep free and clear of blockage.
40. SQUEEGEE PITCH ADJUSTMENT:
Adjusts pitch of Squeegee. Deflection should be even across entire blade.
41. TANK LATCH:
Secures tank to frame.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
