TCA 9000 Series User Manual
_______________________________________________________
3
Insert Master Disc...
Press any key.
Put the Master Disc in the Input Hopper on top of the Blank disc and press the
ENTER
key. The Autoloader will pick the Master Disc, and place it in the drive
tray, the tray will close and the Master Disc will be analyzed, and then read.
When the Master read is complete, the tray will open and Autoloader will
remove the disc from the tray, and place it into the Accept pile. The arm will
then return to the Input stack, and take the blank disc placed there earlier.
This will be loader into the first recorder.
The recorder tray will close and you are copying your first Disc! There is a
timer at the top right corner of the display that counts down, showing the
approximate time left before the end of the recording.
Quick Start Comparing
Using the Compare function is essentially the same as copying. The only
difference is that you use the
Start Comparing
menu selection, and you will be
using written discs, rather than blank ones. Please see the Quick Start section
above.
NOTE:
Because of the way Audio and Video CDs are recorded, CDs containing
Audio or Video tracks cannot be verified. This is not a limitation of the TCA
Autoloader equipment, but a limitation of the CD error correction system.
