_______________________________________________________TCA 9000 Series User Manual
10
Loader Utilities
Loader utilities provide a means by which the loader mechanism can be
tested or diagnosed. These utilities are meant for
Global DiscWare
approved service personnel and advanced users only. If in doubt, do not
use these utilities.
System Information
These functions are used to display information about the various
components installed in the CD Autoloader.
PCA Info
Display the installed firmware level, amount of RAM and the number of
recorders found in the system, and the number of recorders licensed in
this system. In addition, network information including IP address,
network mast and MAC address are displayed.
Writer Info
Display Recorder manufacturer, model number and firmware revision.
While it is possible to use different writer types, and different firmware
revisions, Global DiscWare recommends using the same writer type and
the latest approved writer firmware.
Hard Drive Info
Display the manufacturer, model number and capacity of the installed
hard drive.
Autoloader Info
Display Autoloader information.
Upgrade License
Enabled options can be changed via these functions. To get a new key to
enable new options contact
Global DiscWare
or an authorized
Global
DiscWare
distributor.
Show Current Key
Display current installed options Key String. You MUST have this Key
String available when contacting
Global DiscWare
or an authorized
Global
DiscWare
distributor.
Enter New Key
Enter new installed options Key String. Entering this Key String can change
your installed options. Contact Global DiscWare or an authorized Global
DiscWare distributor to get a new key string. See the Entering Text section
of this chapter for instructions on entering text.
