R-sensors LLC
Bldg. 1, 4, Likhachevsky proezd, Dolgoprudny, 141701, Russia
+7 (498) 744-69-95,
r-sensors@mail.ru
NDAS-N. User Manual.
65
13.4 Connections list
The
Connections
tab makes it possible to edit the list of the NJSP servers which the module will
attempt to connect to. To add a new NJSP signal source, enter the IP address and the port number of
NJSP. If the device is locally connected (to a signal source located on the same device), use IP address
of 127.0.0.1. Then click the
add connection
button.
The new connection should appear in the connections list below. If the connection to the NJSP
server has been successful, the connection status will change to
Connected
and the Device column will
display the serial number and device name.
To remove the connection, click the
remove
button in the corresponding line.
Fig. 13.2. Raw Data Logger module. Connections status and control
13.5 Streams list
The data of every source may contain multiple data streams. The
Streams
tab displays
information about the streams that are currently active. The device serial number, network address,
stream name, file path, and statistics are also displayed.
