13
Controls and settings
The MIG181 features 4 main operating modes
MIG in EASY mode
MIG in Manual mode
MMA (STICK) in EASY mode
MMA (STICK) in Manual mode
MIG EASY MODE
-
With gas
R
-
Tech Easy mode takes the guesswork out of MIG welding. You normally had to enter wire speed and
welding voltage to weld on manual welders, we have done this for you.
You simply select the following from easy to understand screen.
Wire diameter
Material thickness
The machine will set main welding voltage and wire feed speed
Press select button to required gas being used 95% Arg/Co2 or 20% Arg/Co2
TO ENTER EASY MODE
-
PRESS EASY SET BUTTON ON FRONT PANEL
Press left arrow to switch between 0.6mm and 0.8mm wire diameter, the selected size will flash
Now press right arrow to switch between material thickness, the selected size will flash
EASY SET MIG 0.6mm wire
The above image shows 0.6mm wire selected, you then have material thickness options of
0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
