14
EASY SET MIG 0.6mm continued
Once you have selected 0.6mm wire size and material thickness the suggested wire speed
and voltage will be shown in the display, you are now ready to weld.
If you want to fine tune the weld characteristics to suit your personal preference.
You can trim the wire speed by 1 m/min by turning wire speed knob.
You can trim the welding voltage by +/
-
1V by turning welding voltage knob.
EASY SET MIG 0.8mm wire
The above image below shows 0.8mm wire selected, you then have material thickness options of
0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm and 4.0mm
Once you have selected 0.8mm wire size and material thickness the suggested wire speed
and voltage will be shown in the display, you are now ready to weld.
If you want to fine tune the weld characteristics to suit your personal preference.
You can trim the wire speed by 1 m/min by turning wire speed knob.
You can trim the welding voltage by 1V by turning welding voltage knob.
