16
MIG Manual mode
In manual MIG mode you have full control of welding wire feed speed, welding voltage,
2T/4T trigger options, Burnback control and spool on gun operation.
Use select button to select 95% ARG Mode, ensure EASY SET is off, the following screen will be shown.
Set wire feed speed using left side knob, adjustable between 1.5
-
12 m/min.
Set welding voltage using right side knob, adjustable between 13v
-
23v.
2T & 4T Trigger control
You can select between 2T and 4T trigger options by pressing left or right arrow buttons until 4T is flashing,
then use left knob to turn from off/on.
2T
-
Press trigger to start weld, release to finish weld.
4T
-
Press and release trigger to start weld, To finish weld press and release trigger.
This is commonly know as trigger latching.
