18
MMA (STICK) EASY
R
-
Tech EASY SET mode takes the guesswork out of MMA welding. You normally had to enter
required amperage to weld on manual welders, we have done this for you.
You simply select the following from the easy to understand screen.
Electrode Type 6013 or 7018
Electrode diameter
Material thickness
The machine will set main welding amperage required.
Press select button so MMA mode is illuminated.
TO ENTER EASY MODE
-
PRESS EASY SET BUTTON ON FRONT PANEL
Press left arrow to switch between electrode type and electrode size, the selected electrode type and size
will flash.
Now press right arrow to switch between material thickness, the selected size will flash.
Once you have selected electrode type and size and material thickness, the required welding amperage
will show in display as image below. You are now ready to weld.
0
90
You can trim the welding amperage by using left control knob + /
-
10 amps to suit your personal
welding travel speed / weld bead.
