4
Introduction
The R-Tech Plasma 30DV is a member of our field acclaimed family of welding products.
Premium features include:
-
1. Inverter power source – more efficient to operate, provides smoother weld characteristics.
2. Infinite cutting power adjustment, allows fine tuning of cut characteristics
3. HF start – Enables easy arc starting
4. Digital amp meter
5. Quick fitting torch for easy torch fitment/replacement
6. Long life – Low cost torch consumables
7. 35% Duty cycle at 30 Amps 240V / 25Amps 110V @ 40
º
C
Recommended Processes
The R-Tech Plasma 30DV is recommended for the plasma cutting processes within its output capacity of
30 Amps DC
Equipment Limitations
The R-Tech Plasma 30DV is protected from overloads beyond the output ratings and duty cycle as per
machine specifications with thermostat protection of the output coils and rectifiers.
Cutting Capability – Duty Cycle
The R-Tech Plasma 30DV is rated at 30 Amps at 35% duty cycle on a ten minute basis. If the duty cycle
is exceeded a thermal protector will shut machine off until the machine cools.
Technical Specifications
MODEL
PLASMA 30DV
Power Voltage
110/240V 50/60Hz
Input Current 240V Fuse Rating
13 Amps
Input Current 110V Fuse Rating
32 Amps
Rated Output Current
30A @ 240V - 25A @ 110V
Current Adjusting Range
15-30A @ 240V (15-25A @110V)
No-load Voltage
200V
Rated Duty Cycle
35%
Working Mode
HF Contact Start
Air Pressure
50 PSI
Max. Cutting Thickness (Clean cut mild steel)
8mm
Max. Cutting Thickness (Severance cut mild steel)
12mm
After Flow Time
10 Seconds
Dimensions
390 X 190 X 290
