8
/ 30
User Manual
Rev. 1.0 - 18/06/12
DTUTT1K2HP1D
ELETTRONICA
•
To adjust the desired
working frequency
do the following operations:
Select
Frequency
(SET menu), rotate the encoder and then press it to enter
in the submenu.
Select the
Frequency
field (working frequency), rotate the encoder
and then
press it to enter in modality of parameter modification.
The frequency channel set emulates the traditional encoder. By placing the cursor
in each of the nine digits you can change the value from 0 to 9, so the frequency
channel had a precision of 1 Hz. Selecting OK this setting is stored, otherwise
selecting ESC each variation is ignored and you return in the previous menu.
•
To adjust the desired
working power
do the following operations:
Select
Power
(SET menu), rotate the encoder and then press it to enter in the
submenu.
Select the
POWER
field (reading and adjustment of delivered power), rotate the
encoder
and then press it to enter in modality of parameter modification.
The reading is expressed in Watt. Pressing the encoder and turning the encoder
you can set the percentage value. Pressing another time the encoder the
new value is stored.