10
/ 30
User Manual
Rev. 1.0 - 18/06/12
DTUTT1K2HP1D
ELETTRONICA
Menu select Screen
6.2.1 LCD and scrolls buttons
The operator uses the control software of the transmitter by means of a series of
menus that are displayed on the LCD. Four specific keys are provided for scrolling
through the menus, performing the settings and giving the commands:
Function
Description
OK
Click this button to access a sub-menu,
to enter the editing mode or to confirm a
modified value.
ESC
Click this button to exit from a menu or to
cancel the modification of a value.
Click this button to scroll inside a menu (to
the right or down) or to reduce the value of a
parameter being modified.
Click this button to scroll inside a menu (to
the left or up) or to increase the value of a
parameter being modified.
When the operator is not using the various buttons to navigate, the LCD displays
the preset screenful that shows the overall status of the machine’s modules. The
control unit acquires, every second, the status of the other modules by means of
a COM serial bus. The activity at the bus is signalled by the “BUS INT” LEDs on
the unit’s panel.
As indicated on the preset screenful, push the ESC button to access the screenful
for selecting the menus.
On reaching the selection screenful, move the cursor (full rectangle) using the
arrow keys to display the concerned line. Then click OK to access the associated
menu. Select the “General Status” menu to return to the preset screenful.
6.2.2 Buttons, selector switches and LEDs
The typical machine-control operations are performed using the buttons of the
control unit’s panel. Specific LEDs correspond to each button and selector switch
for indicating the machine’s status.
